← Back to opportunities

Supply and Commissioning of an Inductively Coupled Plasma Etcher

University of Strathclyde

Buyer Contact Info

Buyer Name: University of Strathclyde

Buyer Address: Learning & Teaching Building, 49 Richmond Street, Glasgow, UKM82, G1 1XU, United Kingdom

Contact Name: Natasha Murray

Contact Email: natasha.murray@strath.ac.uk

Status
active
Procedure
open
Value
425827.0 GBP
Published
11 Jun 2025, 15:49
Deadline
14 Jul 2025, 11:00
Contract Start
n/a
Contract End
n/a
Category
goods
CPV
31712100 - Microelectronic machinery and apparatus
Region
n/a
Awarded To
n/a
Official Source
Open Find a Tender

Description

This Notice relates to an open tender above the Agreement on Government Procurement (GPA) threshold for goods related to research and development equipment required by the University of Strathclyde's (Contracting Authority) Institute of Photonics department. The Contracting Authority envisions a single supplier shall undertake the contract for the supply, delivery, installation and commissioning of an Inductively Coupled Plasma Etcher system at a University of Strathclyde Lab facility, located in the Technology and Innovation Centre (TIC) specified cleanroom. The equipment is grant funded by the Wolfson Foundation to advance scientific investigation in neuro-technology.

Linked Documents

No linked documents found for this notice.

Opportunity Context

Lots

Lot Description: The Institute of Photonics is seeking to complement their cleanroom micro-fabrication facility equipment with an Inductively Coupled Plasma Etcher system The Technical Team envision that the equipment will process semiconductor materials that will include but not be limited to: 1 Gallium Nitride (GaN) light-emitting diodes 2 Silicon (Si) passive and active devices The equipment will be used to advance scientific investigation in neuro-technology and operated by PhD students, Postdoctoral Research Associates and Technicians within the Institute of Photonics. The Contracting Authority anticipates that the contract will be for a duration of twenty (24) months. The Contracting Authority requires a supplier that can fulfil the below non-exhaustive list of requirements: 1 Inductively Coupled Plasma Reactive Ion Etching (ICP-RIE) mode of operation to plasma etch hard materials such as GaN at etch rate of >500nm/min 2 Deep Silicon Etching (DSE) mode of operation to plasma etch high aspect ratio and high-density structures in Silicon at etch rate of >1000nm/min 3 These two modes of operation co-existing within the same equipment within a minimal footprint 4 Low-maintenance, especially with the provision of servicing-free high vacuum pumping systems (magnetic-levitated turbo molecular pump) Please refer to the full technical and tender information available in the Public Contracts Scotland-Tender.

Lot 1 Status: active

Lot 1 Has Options: Yes

Lot 1 Options: The Contracting Authority reserves the right to request additional deliveries by the successful Tenderer, either intended as partial replacement of supplies or installations or as extensions of existing supplies and installations. The Contracting Authority may at it's sole discretion exercise this option.

Lot 1 Value: GBP 425,827.00

Lot 1 Award Criterion (quality): Quality

Raw Notice JSON

Expand raw payload
{
  "buyer": {
    "id": "GB-FTS-135284",
    "name": "University of Strathclyde"
  },
  "date": "2025-06-11T16:49:01+01:00",
  "description": "The buyer is using PCS-Tender to conduct this ITT exercise. The Project code is 29124. For more information see: http://www.publiccontractsscotland.gov.uk/info/InfoCentre.aspx?ID=2343\nCommunity benefits are included in this requirement. For more information see: https://www.gov.scot/policies/public-sector-procurement/community-benefits-in-procurement/\nA summary of the expected community benefits has been provided as follows:\nVoluntary Community benefits are included in this requirement. For more information see:\nhttps://www.gov.scot/policies/public-sector-procurement/community-benefits-in-procurement/\nThe Contracting Authority acknowledges that is procurement activities have a significant impact on the environment, society and the economy. The Contracting Authority recognises that Community Benefits are a key component in maximising social, economic and environmental benefits. The achievements and delivery of Community Benefits can contribute to the University of Strathclyde\u0027s strategic Plan 2030. The Contracting Authority proposes to use a Voluntary Approach to Community Benefits for this requirement; This approach is to encourage the Tenderer to offer Community Benefits post Tender Submission. These offered Community Benefits will not form part of the contractual obligation and will not form part of the consideration at Tender evaluation stage.\n(SC Ref:800205)",
  "id": "031668-2025",
  "initiationType": "tender",
  "language": "en",
  "links": [
    {
      "href": "https://api.publiccontractsscotland.gov.uk/v1/Notice?id=ocds-r6ebe6-0000792877",
      "rel": "canonical"
    }
  ],
  "ocid": "ocds-h6vhtk-04eb72",
  "parties": [
    {
      "address": {
        "countryName": "United Kingdom",
        "locality": "Glasgow",
        "postalCode": "G1 1XU",
        "region": "UKM82",
        "streetAddress": "Learning \u0026 Teaching Building, 49 Richmond Street"
      },
      "contactPoint": {
        "email": "natasha.murray@strath.ac.uk",
        "name": "Natasha Murray",
        "url": "https://www.publictendersscotland.publiccontractsscotland.gov.uk/esop/pts-host/public/pts/web/login.html"
      },
      "details": {
        "buyerProfile": "https://www.publiccontractsscotland.gov.uk/search/Search_AuthProfile.aspx?ID=AA00113",
        "classifications": [
          {
            "description": "Body governed by public law",
            "id": "BODY_PUBLIC",
            "scheme": "TED_CA_TYPE"
          },
          {
            "description": "Education",
            "id": "09",
            "scheme": "COFOG"
          }
        ],
        "url": "http://www.strath.ac.uk/"
      },
      "id": "GB-FTS-135284",
      "identifier": {
        "legalName": "University of Strathclyde"
      },
      "name": "University of Strathclyde",
      "roles": [
        "buyer",
        "centralPurchasingBody"
      ]
    },
    {
      "address": {
        "countryName": "United Kingdom",
        "locality": "Glasgow",
        "postalCode": "G5 9DA",
        "streetAddress": "1 Carlton Place"
      },
      "id": "GB-FTS-2553",
      "identifier": {
        "legalName": "Glasgow Sheriff Court"
      },
      "name": "Glasgow Sheriff Court",
      "roles": [
        "reviewBody"
      ]
    }
  ],
  "tag": [
    "tender"
  ],
  "tender": {
    "awardPeriod": {
      "startDate": "2025-07-14T12:00:00+01:00"
    },
    "bidOpening": {
      "date": "2025-07-14T12:00:00+01:00"
    },
    "classification": {
      "description": "Laboratory, optical and precision equipments (excl. glasses)",
      "id": "38000000",
      "scheme": "CPV"
    },
    "communication": {
      "atypicalToolUrl": "https://www.publictendersscotland.publiccontractsscotland.gov.uk/esop/pts-host/public/pts/web/login.html"
    },
    "contractTerms": {
      "electronicInvoicingPolicy": "allowed",
      "hasElectronicOrdering": true,
      "hasElectronicPayment": true
    },
    "coveredBy": [
      "GPA"
    ],
    "description": "This Notice relates to an open tender above the Agreement on Government Procurement (GPA) threshold for goods related to research and development equipment required by the University of Strathclyde\u0027s (Contracting Authority) Institute of Photonics department. The Contracting Authority envisions a single supplier shall undertake the contract for the supply, delivery, installation and commissioning of an Inductively Coupled Plasma Etcher system at a University of Strathclyde Lab facility, located in the Technology and Innovation Centre (TIC) specified cleanroom.\nThe equipment is grant funded by the Wolfson Foundation to advance scientific investigation in neuro-technology.",
    "hasRecurrence": false,
    "id": "UOS-36338-2025",
    "items": [
      {
        "additionalClassifications": [
          {
            "description": "Microelectronic machinery and apparatus",
            "id": "31712100",
            "scheme": "CPV"
          }
        ],
        "deliveryAddresses": [
          {
            "region": "UKM82"
          }
        ],
        "deliveryLocation": {
          "description": "University of Strathclyde"
        },
        "id": "1",
        "relatedLot": "1"
      }
    ],
    "legalBasis": {
      "id": "32014L0024",
      "scheme": "CELEX"
    },
    "lots": [
      {
        "awardCriteria": {
          "criteria": [
            {
              "description": "50",
              "name": "Quality",
              "type": "quality"
            },
            {
              "description": "50",
              "type": "price"
            }
          ]
        },
        "contractPeriod": {
          "durationInDays": 720
        },
        "description": "The Institute of Photonics is seeking to complement their cleanroom micro-fabrication facility equipment with an Inductively Coupled Plasma Etcher system\nThe Technical Team envision that the equipment will process semiconductor materials that will include but not be limited to:\n1 Gallium Nitride (GaN) light-emitting diodes\n2 Silicon (Si) passive and active devices\nThe equipment will be used to advance scientific investigation in neuro-technology and operated by PhD students, Postdoctoral Research Associates and Technicians within the Institute of Photonics.\nThe Contracting Authority anticipates that the contract will be for a duration of twenty (24) months. The Contracting Authority requires a supplier that can fulfil the below non-exhaustive list of requirements:\n1 Inductively Coupled Plasma Reactive Ion Etching (ICP-RIE) mode of operation to plasma etch hard materials such as GaN at etch rate of \u003e500nm/min\n2 Deep Silicon Etching (DSE) mode of operation to plasma etch high aspect ratio and high-density structures in Silicon at etch rate of \u003e1000nm/min\n3 These two modes of operation co-existing within the same equipment within a minimal footprint\n4 Low-maintenance, especially with the provision of servicing-free high vacuum pumping systems (magnetic-levitated turbo molecular pump)\nPlease refer to the full technical and tender information available in the Public Contracts Scotland-Tender.",
        "hasOptions": true,
        "hasRenewal": false,
        "id": "1",
        "options": {
          "description": "The Contracting Authority reserves the right to request additional deliveries by the successful Tenderer, either intended as partial replacement of supplies or installations or as extensions of existing supplies and installations.\nThe Contracting Authority may at it\u0027s sole discretion exercise this option."
        },
        "status": "active",
        "submissionTerms": {
          "variantPolicy": "notAllowed"
        },
        "value": {
          "amount": 425827.0,
          "currency": "GBP"
        }
      }
    ],
    "mainProcurementCategory": "goods",
    "procurementMethod": "open",
    "procurementMethodDetails": "Open procedure",
    "selectionCriteria": {
      "criteria": [
        {
          "appliesTo": [
            "supplier"
          ],
          "description": "4B.1.2 Turnover\nBidders will be required to have an average yearly turnover of a minimum of 850,000.00 GBP for the last 3 years.\n4B.5.1a - 4B.5.3 Insurances\nIt is a requirement of this contract that bidders hold, or can commit to obtain prior to the commencement of any subsequently awarded contract, the types and levels of insurance indicated below:\nEmployer\u2019s (Compulsory) Liability Insurance = 10m GBP\nPublic and Product Liability Insurance = 10m GBP\nProfessional Indemnity Insurance = NOT USED\nIn respect of any one incident and unlimited as to number of claims, and adequate insurances covering all the Contractor\u0027s other liabilities in terms of the Contract",
          "type": "economic"
        },
        {
          "appliesTo": [
            "supplier"
          ],
          "description": "4C.1.2 Previous Experience Minimum level(s) of standards required:\nBidders will be required to provide three (3) examples that demonstrate that they have the relevant experience to deliver the equipment as stated in the Contract Notice.",
          "type": "technical"
        }
      ]
    },
    "status": "active",
    "submissionMethod": [
      "electronicSubmission"
    ],
    "submissionMethodDetails": "https://www.publictendersscotland.publiccontractsscotland.gov.uk/esop/pts-host/public/pts/web/login.html",
    "submissionTerms": {
      "bidValidityPeriod": {
        "durationInDays": 120
      },
      "languages": [
        "en"
      ]
    },
    "tenderPeriod": {
      "endDate": "2025-07-14T12:00:00+01:00"
    },
    "title": "Supply and Commissioning of an Inductively Coupled Plasma Etcher",
    "value": {
      "amount": 425827.0,
      "currency": "GBP"
    }
  }
}