4449/AMRC/JS/25-5 Axis Milling Machine

{
  "buyer": {
    "id": "GB-COH-RC000667",
    "name": "UNIVERSITY OF SHEFFIELD"
  },
  "date": "2025-05-28T14:29:09+01:00",
  "id": "028138-2025",
  "initiationType": "tender",
  "language": "en",
  "ocid": "ocds-h6vhtk-052805",
  "parties": [
    {
      "address": {
        "country": "GB",
        "countryName": "United Kingdom",
        "locality": "Sheffield",
        "postalCode": "S10 2TN",
        "region": "UKE32",
        "streetAddress": "Firth Court, Western Bank"
      },
      "contactPoint": {
        "email": "procurement@amrc.co.uk"
      },
      "details": {
        "classifications": [
          {
            "description": "Public authority - sub-central government",
            "id": "publicAuthoritySubCentralGovernment",
            "scheme": "UK_CA_TYPE"
          }
        ],
        "url": "https://www.sheffield.ac.uk/"
      },
      "id": "GB-COH-RC000667",
      "identifier": {
        "id": "RC000667",
        "scheme": "GB-COH"
      },
      "name": "UNIVERSITY OF SHEFFIELD",
      "roles": [
        "buyer"
      ]
    }
  ],
  "tag": [
    "tender"
  ],
  "tender": {
    "aboveThreshold": true,
    "awardPeriod": {
      "endDate": "2025-07-16T23:59:59+00:00"
    },
    "description": "4449/AMRC/JS/25 - 5 Axis Milling  Machine for AMRC North West\nThe University of Sheffield wishes to invite tenders for the supply, installation and commissioning of a \u00275 Axis Milling Machining Machine\u0027 on behalf of the Advanced Manufacturing Research Centre,\nThe \u20185-Axis Milling Machine\u2019 which will be used for research, testing and demonstration purposes in the AMRC North West, Samlesbury facility. \nThe equipment will support the AMRC\u2019s research into technologies such as machinability, dynamics and process monitoring. The equipment should have adequate robustness, high precision and repeatability to facilitate the manufacture of high-performance components for various sectors including aerospace and biomedical with demanding tolerance requirements.\nCompulsory requirements:  \nThe \u20185-Axis Milling Machine\u2019 (please see section G1 of the ITT for further details):\n1.\tMust be capable of 5-axis simultaneous machining.\n2.\tMust have the ability to machine a range of alloys commonly used in aerospace, automotive and other high value manufacturing industries, including (but not limited to) titanium, nickel superalloys, tool steels, and stainless steels.\n3.\tMust not exceed 5000 mm (width) x 5000 mm (length) including ancillaries (such as chiller, filter) as the footprint. For the avoidance of doubt, the height of the equipment is not a concern to the University.  \n4.\tMust weigh 15,000 kg or less.\n5.\tMust have a tool magazine with a capacity of 20 tools or above (depending on tool size).\n6.\tMust include a probe for part alignment. \n7.\tMust include a probe for tool length and diameter measurement.\n8.\tMust include electronic handwheel/pendant for ease of setup.\n9.\tMust be capable of a linear positioning accuracy of 0.006 mm or better.\n10.\tMust be capable of at least 12,000 RPM of spindle speed.\n11.\tMust be capable of providing a spindle torque of at least 80 Nm.\n12.\tMust be able to accommodate tools with a length of at least 300 mm (and shorter as well).\n13.\tMust be able to accommodate tools with a diameter of at least 130 mm (and smaller as well).\n14.\tMust be able to accommodate tools with a mass of at least 8 kg (and lower as well).\n15.\tMust include a chip conveyor.\n16.\tMust be capable of machining of workpieces with a mass of at least 300 kg (and lower as well).\n17.\tMust be capable of accommodating a workpiece with a diameter of at least 500 mm (and lower as well).\n18.\tMust be capable of accommodating a workpiece height of at least 400 mm (and lower as well).\n19.\tMust allow machining with at least 10 bar through tool coolant pressure.\n20.\tMust be capable of traversing at least 500 mm in at least one of the X or Y axes.\n21.\tMust be capable of achieving a surface quality and dimensional tolerances on freeform surfaces as specified in Appendix A. \n22.\tMust have local exhaust ventilation/mist extraction system capable of filtering and exhausting the mist generated by emulsion coolants used during machining. Please see the \u2018Health \u0026 Safety and Equipment Regulations\u2019 section g).\nTender Process and Documentation:\nThis procurement is a CDP (FTS) Open procedure conducted in accordance with the Procurement Act 2023.\nThe ITT can be downloaded by registering and expressing your interest on the University`s e-tendering system https://in-tendhost.co.uk/Sheffield\nIf you have any questions or comments in relation to this tender they must be submitted via the In-tend System, this can be accessed at https://in-tendhost.co.uk/Sheffield\nCompleted tenders must be returned through the same e-tendering system.\nClosing date for receipt of tenders: Monday 23rd June 2025 at 12 noon (UK time).",
    "documents": [
      {
        "description": "All tender documentation can be accessed on the above URL",
        "documentType": "biddingDocuments",
        "id": "L-1",
        "url": "https://www.in-tendhost.co.uk/sheffield/"
      },
      {
        "description": "Not published",
        "documentType": "conflictOfInterest",
        "id": "conflictOfInterest"
      },
      {
        "datePublished": "2025-05-28T14:29:09+01:00",
        "description": "Tender notice on Find a Tender",
        "documentType": "tenderNotice",
        "format": "text/html",
        "id": "028138-2025",
        "noticeType": "UK4",
        "url": "https://www.find-tender.service.gov.uk/Notice/028138-2025"
      }
    ],
    "enquiryPeriod": {
      "endDate": "2025-06-13T17:00:00+00:00"
    },
    "id": "4449/AMRC/JS/25",
    "items": [
      {
        "additionalClassifications": [
          {
            "description": "Lathes, boring and milling machine tools",
            "id": "42620000",
            "scheme": "CPV"
          },
          {
            "description": "Milling machines",
            "id": "42623000",
            "scheme": "CPV"
          },
          {
            "description": "Machine tools for drilling, boring or milling metal",
            "id": "42637000",
            "scheme": "CPV"
          },
          {
            "description": "Machine tools for milling metal",
            "id": "42637300",
            "scheme": "CPV"
          }
        ],
        "id": "LOT-0001",
        "relatedLot": "LOT-0001"
      }
    ],
    "legalBasis": {
      "id": "2023/54",
      "scheme": "UKPGA",
      "uri": "https://www.legislation.gov.uk/ukpga/2023/54/contents"
    },
    "lots": [
      {
        "awardCriteria": {
          "criteria": [
            {
              "description": "Scoring criteria (including weighting) is included in the Invitation to Tender document",
              "name": "Simple description",
              "type": "price"
            }
          ],
          "weightingDescription": "Scoring criteria (including weighting) is included in the Invitation to Tender document"
        },
        "contractPeriod": {
          "endDate": "2028-07-20T23:59:59+00:00",
          "startDate": "2025-07-21T00:00:00+00:00"
        },
        "id": "LOT-0001",
        "status": "active",
        "value": {
          "amount": 250000,
          "amountGross": 300000,
          "currency": "AED"
        }
      }
    ],
    "mainProcurementCategory": "goods",
    "procurementMethod": "open",
    "procurementMethodDetails": "Open procedure",
    "status": "active",
    "submissionMethodDetails": "please submit your tender proposal at the following address - https://www.in-tendhost.co.uk/sheffield/",
    "submissionTerms": {
      "electronicSubmissionPolicy": "allowed",
      "languages": [
        "en"
      ]
    },
    "tenderPeriod": {
      "endDate": "2025-06-23T12:00:00+00:00"
    },
    "title": "4449/AMRC/JS/25-5 Axis Milling Machine",
    "value": {
      "amount": 250000,
      "amountGross": 300000,
      "currency": "GBP"
    }
  }
}